Top 10 3M Cubitron Ii Sheets

Product Description

3M Utility Cloth Roll 314D provides light-weight cloth sanding strips used for hand sanding in many different applications. Constructed with aluminum oxide abrasive, the utility rolls come in a range of grades for common applications such as deburring, blending and repairing metal finishes, rust or other contaminant removal, and surface preparation for paints and coatings.

From the Manufacturer

The 3M™ Portable Utility Cloth Roll 314D provides light-weight cloth sanding strips used for hand sanding in many different applications. The desired length of the strip can be torn from the roll for a specific application. Constructed with aluminum oxide abrasive, utility rolls come in a range of grades for common applications such as deburring, blending and repairing metal finishes, rust or other contaminant removal, and surface preparation for paints and coatings. Aluminum oxide abrasive can be used on ferrous and non-ferrous metals, wood, and plastic.

Most grades have a light, J-weight cloth backing that provides the flexibility needed to conform to circular edges, angles, or other contours. Rolls in grades P50 or P60 have a slightly stiffer X-weight backing suitable for more coarse sanding applications. Cloth remains durable even when bent or rolled, without tearing or shelling, but strips can be torn by hand when a smaller piece is needed, without compromising the sanding surface.

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Product Description

3M Cubitron II Cut-Off Wheel features 3M Precision Shaped Ceramic Grain to bring you an exceptionally fast-cutting and long-lasting wheel for use on almost all materials, including stainless steel, mild steel, and aerospace alloys. This cut-off wheel surpasses 3M High Performance wheels in both cut and life to deliver significant gains in productivity.

From the Manufacturer

The 3M™ Cubitron™ II Cut-Off Wheel features 3M™ Precision-Shaped Ceramic Grain to bring you an exceptionally fast-cutting and long-lasting wheel for use on almost all materials, including stainless steel, mild steel, and aerospace alloys. This cut-off wheel surpasses 3M™ High Performance wheels in both cut and life to deliver significant gains in productivity. Experience the power of 3M precision-shaped grain to provide a cool, extra-sharp, quick cut long after other wheels are consumed.

Using Type 1 Cut-Off Wheels

Type 1 wheels have a flat center and must be run on a cut-off wheel power tool designed specifically for the size of wheel used. For safety, cut-off wheels must be used with ANSI-approved flanges for Type 1 cut-off wheels and must always be used with a wheel guard that is compatible with the size of the wheel. The cut-off wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used.

Unlike coated abrasive discs, which shape or sand objects using the disc surface, cut-off wheels provide perpendicular cuts, using the outer edge of the wheel. Abrasive cut-off wheels are typically used for cutting through metal, for example autobody or marine sheet metal, stainless steel tubing, exhaust pipes, clamps, and rusted fasteners. Cut-off wheels are attached to a cut-off wheel tool (sold separately) and must always be used with a wheel guard for safety.

Experience the Powerful Performance of 3M™ Cubitron™ II

3M Cubitron II products have raised the bar for high-performing abrasives. 3M precision-shaped ceramic grain (PSG) outcuts and outlasts conventional ceramic industrial abrasives and requires less grinding force to achieve superior performance. The result is that operators can grind faster and complete more parts per disc with less muscle-work and fatigue.

To create PSG, 3M engineers started with 3M ceramic abrasive grain and used proprietary technology to form the grains into triangular structures and electrostatically orient them on the backing to form sharp peaks that maximize cutting potential. These peaks slice cleanly through metal like a knife through butter, rather than gouging or plowing as traditional abrasives do, and continuously self-sharpen as the points break off. This generates a super-fast cut and lessens heat build-up due to friction, reducing heat-related stress cracks and discoloration.

PSG also wears evenly, and because the abrasive itself stays cooler and sharper, Cubitron II products last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications.

About 3M Abrasive Systems

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Product Description

3M Cloth Belt 341D is a durable aluminum oxide cloth belt recommended for your metal deburring, general metalworking, and some woodworking applications It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood

From the Manufacturer

The 3M&#8482 Cloth Belt 341D is a durable aluminum oxide cloth belt recommended for metal deburring, general metalworking, and some woodworking applications. It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood. Fast-cutting aluminum oxide abrasive grains are resin-bonded to a durable X-weight cotton cloth backing to provide continuous cut and long-life performance necessary for more aggressive dry sanding applications. For finishing on metal, the closed coat construction offers a consistent, fine finish, and is suitable for producing a grain pattern. This belt should not be run wet.

Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.

Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. 3M offers a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.

Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimizes chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Our Cubitron II Hookit Clean Sanding Sheet Rolls 737U combines the highest 3M technology for automotive repair. Its long-lasting triangular shaped grain and multi-hole pattern for superior dust extraction make it ideal for paint removal, rough body filler shaping, fine feather-edging or final prep before blending or priming. Our Hookit system makes for quick change-outs of abrasive sheets.

Our Cubitron II Hookit Clean Sanding Sheet Rolls 737U combines the highest 3M technology for automotive repair. Its long-lasting triangular shaped grain and multi-hole pattern for superior dust extraction make it ideal for paint removal, rough body filler shaping, fine feather-edging or final prep before blending or priming. Our Hookit system makes for quick change-outs of abrasive sheets.

Triangular-shaped grain (right image) is electrostatically oriented to form sharp peaks, each acting like individual cutting tools that slice through paint and body filler, wear evenly, and provide long life and consistency. For cut power, comfort and long life, nothing else comes close to the power of 3M Cubitron II Abrasive products.

Triangular-shaped grain (right image) is electrostatically oriented to form sharp peaks, each acting like individual cutting tools that slice through paint and body filler, wear evenly, and provide long life and consistency. For cut power, comfort and long life, nothing else comes close to the power of 3M Cubitron II Abrasive products.

Features. Contains 3M precision-shaped abrasive grain coated on a heavy duty backing. Resin bonded for heat resistance. Coated with a dry grinding aid to help reduce heat buildup. 3M precision shaped ceramic grain continuously fractures into sharp points that cut exceptionally fast helping increase productivity. Engineered to run cooler reducing metal discolorationoxidation and the chance of heat related stress cracks. Coated with a dry grinding aid to further enhance the products ability to run cooler and cut faster. Grade – 60 Grit. Abrasive Mineral – Citron II

3M Cubitron II Flap Disc 967A is ideal for medium-pressure applications on flat and contoured surfaces, especially in light deburring or weld leveling to prep for paint in mild steel. It’s also great for stainless steel fabrication where finish and gouge resistance are important. Powered by 3M Precision-Shaped Grain, this disc cuts fast and lasts long.

Product Description

3M flange adapter. It is used to reduce 1-inches internal diameter core size, flange size or wheel size to fit shafts smaller than 1-inches diameter. This item is a stamped and formed sheet metal product. Fits 5-inches through 8-inches diameter flap wheels. Size: 5/8-inches diameter. Converted form: adapter. Equipment – machines: bench grinders, bench motors, benchtop, die grinders, inline sanders. Form type: flange.

From the Manufacturer

The 3M&#8482 Flange Adapter 3 adapts a 5″ to 8″ wheel with a 1″ center hole to fit onto a tool with a shaft smaller than one inch. The internal diameter of the adapter should match the diameter of the tool shaft. The flange fits a deburring wheel, unitized wheel, or flap wheel, or any wheel with a 1″ center hole. The adapter is made from stamped and formed sheet metal.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface conditioning application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.